Primefarms Discuss a project↗
← Irrigation SystemsWATER INFRASTRUCTURE / PUMPING

Pumping
station

A pumping station takes water from the source and delivers it to the irrigation network at the pressure and flow the project needs.

Free consultation↗

How a pumping station is built

A pumping station takes water from the source and supplies the irrigation network at the pressure and flow the project needs. It is not a standalone machine: it ties the main pipe, filtration and the orchard irrigation system into one circuit.

Primefarms starts from the water source, the elevation change and the orchard's water demand. Then come the hydraulic scheme, pump and panel selection, installation of the node and the main, and commissioning. Where needed, drip irrigation, filtration and fertigation join the same project.

What the published stations show

The main parts are pumps, a manifold, control panels, automation and the main pipe. Pump type and number follow flow, pressure and the source. Primefarms does not publish one universal model. Completed stations show a range, not one figure for every orchard.

In Kakheti, Primefarms built a pumping station with a combined capacity of 900 m³/h. It feeds a supply network. The node has three Caprari vertical pumps. The main is about 3 km of DN400 polyethylene, commissioned at about 14 atmospheres. That is a published project, not a template for the next plot.

On the 400 ha almond orchard, three pumping stations were built. One supplies water from the river. Two serve the irrigation system. Combined capacity is 2,600 m³/h. Pumps, panels and automation are one system. That orchard is in East Georgia. On the 300+ ha blueberry systems in West Georgia, water supply, filtration and fertigation are also one circuit, with technical service after commissioning.

Primefarms is the official Netafim and AZUD dealer in Georgia. A pumping station often uses Caprari pumps when the project's pressure and flow match. The choice still follows the project, not a brand list. On an orchard or a plantation the first question is the same: where the water comes from, and what pressure the last emitter needs.

A free consultation needs the plot location, crop, area, and whatever is known about the water source and electricity. The first step can be a technical visit. Phone +995 571 18 18 08, george@primefarms.ge, every day 09:00–18:00.

Questions

What is a pumping station?

It takes water from the source and supplies the irrigation network at the project's pressure and flow. It connects the main, filtration and the orchard system.

What does a pumping station include?

Pumps, a manifold, control panels, automation and the main pipe. Type and number follow flow, pressure and the source.

What stations are already built?

A 900 m³/h station in Kakheti, with three Caprari vertical pumps, about 3 km of DN400 main and about 14 atmospheres. Three stations on the 400 ha almond orchard, 2,600 m³/h combined.

Are pumping stations only in East Georgia?

The published 900 m³/h station and the three almond stations are in Kakheti, East Georgia. Water supply on the West Georgia blueberry systems is part of the same engineering cycle.

Free consultation ↗
Next step

Send the project's
starting facts

Location, crop, area and what is known about the water source. A technical visit can be the first step.

george@primefarms.ge ↗+995 571 18 18 08WhatsApp ↗